Mitsubishi Electric MELSEC-L SERIES Basic User Manual page 38

Address
Application
Decimal
(Hexadecimal)
30
(1E )
H
Initial process
parameter setting
area (For
reinitialization)
31
(1F )
H
36
Name
TCP Maximum Segment Transmission setting area
• 0 : Enable TCP Maximum Segment Size Option transmission
H
• 8000 : Disable TCP Maximum Segment Size Option transmission
H
Re-initialization makes the set value effective.
Communication condition setting (Ethernet Operation Setting) area
Communication data code setting (b1)
• 0: Binary Code
• 1: ASCII Code
TCP existence confirmation setting (b4)
• 0: Use the Ping
• 1: Use the KeepAlive
Send frame setting (b5)
• 0: Ethernet
• 1: IEEE 802.3
Setting of write enable/disable at RUN time (b6)
• 0: Disable
• 1: Enable
Initial timing setting (b8)
• 0: Do not wait for OPEN (Communications impossible at STOP time)
• 1: Always wait for OPEN (Communication possible at STOP time)
Reinitialization specification (b15)
• 0: Reinitialization process complete (reset by the system)
• 1: Reinitialization process request (set by the user)
Bits other than those described above are reserved for system use.
Programming
Initial value tool setting
applicability
8000 
H
0 
H