12.6
Data Format
Communication data consists of a header and application data.
12.6.1
Header
The header for TCP/IP or UDP/IP is used. Because an E71 automatically adds and deletes a header, the user setting
is not required.
(1) Detailed header sizes
(a) TCP/IP
(b) UDP/IP
12.6.2
Application data
This section describes the application data configuration.
(1) Procedure exists
In the application data for communications with the "Procedure Exist" control method, the following data code is
expressed in a binary code or an ASCII code. To switch between a binary code and an ASCII code, use the
Ethernet operation setting.
Project window
"Ethernet" under "Network Type".
Ethernet
IP
(14 bytes)
(20 bytes)
Ethernet
IP
(14 bytes)
(20 bytes)
[Parameter]
[Network Parameter]
CHAPTER 12 COMMUNICATIONS USING A FIXED BUFFER
TCP
(20 bytes)
UDP
(8 bytes)
[Ethernet/CC IE Field]
button
12
Select
133