Mitsubishi Electric MELSEC-L SERIES Basic User Manual page 19

Term
Predefined protocol support function
Programming tool
READ
RECV
RECVS
REQ
SEND
SLMP
SMTP
SREAD
Subnet mask
SWRITE
UINI
WRITE
ZNRD
ZNWR
A function of GX Works2.
This function sets protocols appropriate to each external device and reads/writes protocol setting
data from/to the flash ROM of the E71.
Another term for GX Works2
The abbreviation for JP.READ and GP.READ
The abbreviation for JP.RECV and GP.RECV
The abbreviation for Z.RECVS
The abbreviation for J.REQ, JP.REQ, G.REQ, and GP.REQ
The abbreviation for JP.SEND and GP.SEND
The abbreviation for Seamless Message Protocol.
This protocol is used to access an SLMP-compatible device or a programmable controller
connected to an SLMP-compatible device from an external device.
The abbreviation for Simple Mail Transfer Protocol. This protocol is used to transfer e-mails over
the Internet.
The abbreviation for JP.SREAD and GP.SREAD
A number used to logically divide one network into multiple subnetworks and manage them easily.
The following Ethernet network systems can be configured:
• A small-scale Ethernet network system in which multiple network devices are connected
• A medium- or large-scale network system in which multiple small-scale network systems are
connected via routers or other network communication devices
The abbreviation for JP.SWRITE and GP.SWRITE
The abbreviation for ZP.UINI
The abbreviation for JP.WRITE and GP.WRITE
The abbreviation for J.ZNRD and JP.ZNRD
The abbreviation for J.ZNWR and JP.ZNWR
Description
17