Parameter Setting - Mitsubishi Electric MELSEC-L SERIES Basic User Manual

12.5

Parameter Setting

Set the following parameters to perform communications using a fixed buffer.
• Basic setting (
• Ethernet operation setting (
• Open setting (
Item
Select whether to use the fixed buffer for connection with the connected device for
Fixed Buffer
sending or receiving.
Fixed Buffer
Select the communication method for communications using a fixed buffer.
Communication
Select whether to disable or enable the pairing open for communications using a
fixed buffer.
Pairing Open
(
Select whether or not to use the alive check function. (
Existence Confirmation
14.7) Select "No Confirm" to send data by broadcast communications during "No
Procedure" communications using a fixed buffer.
130
Page 66, Section 7.1.2)
Page 67, Section 7.1.3)
Page 69, Section 7.1.4)
Description
Page 139, Section 12.7)
Setting range
• Send
• Receive
• Procedure Exist
• No Procedure
• Disable
• Enable
Page 194, Section
• No Confirm
• Confirm