Table of Contents
Advertisement
11
Others
11-1. Key Lock Function
The 'key lock function' prevents operators from changing the sensor settings by mistake.
Lock engaged
Lock disengaged
11-2. Threshold Value Confirmation Function
The threshold value confirmation function allows confirmation of the threshold values even during RUN mode.
In case of FX-301(P)(-HS)
In case of FX-305(P)
Turn toward
'
' direction
Displays the
threshold value.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Keep the Jog switch and
the MODE key pressed
for 2 sec. or more at the
same time.
Keep the Jog switch and
the MODE key pressed
for 2 sec. or more at the
same time.
Turn toward
' ' direction
Di s pl a ys the output 1
Displays the output 2
threshol d val u e.
threshold value.
When the Jog switch is released,
the original display returns.
1 Keep the [MODE key] and the [Jog switch] pressed for 2 sec.
or more at the same time in 'RUN mode' condition.
2'
' will be displayed, and the key lock function will be set
to ON.
3Key operations will be locked. Only the threshold value
confirmation function or the adjust function (valid only when
the adjust lock function is disengaged. Refer to p.53) is valid.
If the key lock is engaged while the adjustment lock is
disengaged (refer to p.53), it will only be possible to change
the threshold value.
4To disengage the lock function, keep the [MODE key] and the
[Jog switch] pressed for 2 sec. or more at the same time once
again.
* The threshold value confirmation function is a function for
confirming the threshold value even during RUN mode.
You can display the threshold value by turning the [Jog
switch] in the '
cannot be changed at this time.)
In addition, the original display reappears when you release
the [Jog switch].
'
' direction: FX-301 / FX-305 output 1 threshold value
'
' direction: FX-305 output 2 threshold value confirmation
Turn toward
1 When the Jog switch is turned toward the '
' ' direction
threshold value [for the FX-301(P)(-HS)] or the output 1
threshold value [for the FX-305(P)] will be displayed.
When it is turned toward the '
threshold value [for the FX-305(P)] will be displayed.
* If the FX-305(P) is set to window comparator mode, the
lower limit value will be displayed when the Jog switch is
turned once toward the '
value will be displayed when it is turned once more.
59
' or '
' direction. (The threshold value
confirmation
' direction, the output 2
' direction, and the upper limit
' direction, the
Hide quick links:
Advertisement
Table of Contents
