Digital Display Setting Function - Sunx FX-301 Operation Manual

6-2. Digital Display Setting Function

This function allows the display to be switched among the different digital displays
(incident light intensity display, percentage display, peak hold display, bottom hold display, changed intensity display).
Incident light Percentage Peak hold
intensity display display display
Turn the Jog switch to select
the desired display setting.
The digital display will quickly
blink 3 times to confirm the setting.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the MODE
key 5 times.
Turn the Jog switch
twice toward the
' ' direction.
Press the
Jog switch.
Press the
Jog switch.
Bottom hold Changed intensity
display
display
[FX-305(P) only]
Press the
Jog switch.
Press the MODE key
3 times or keep it
pressed for 2 sec. or
more.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Turn the [Jog switch] twice toward the '
to select 'PRO2 mode'.
3 Press the [Jog switch] to enter the 'digital display setting' state.
4 If the [Jog switch] is pressed, the current 'display setting' will
be displayed.
* The factory setting is 'incident light intensity display'.
' ' is only enabled when '
selected for the FX-305(P).
5 If the [Jog switch] is turned, the digital display will blink.
Select the desired 'display setting'.
However, when the FX-305(P) is in window comparator mode,
the percentage display function cannot be utilized.
6 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times and the 'display setting' will be confirmed.
7 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
37
' direction,
' or ' ' differential mode is