Sunx FX-301 Operation Manual page 22

Setting for 2_SL
Turn the Jog switch to set
the desired threshold value.
In case of
changing
threshold value
to 125.
The digital display will quickly
blink 3 times to confirm the value.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the
8If the [Jog switch] is pressed, the threshold
Jog switch.
value for '2_SL' will be displayed.
If an increased 'threshold value' is desired,
turn the [Jog switch] toward the '
If a decreased 'threshold value' is desired,
turn the [Jog switch] toward the '
Press the
9If the [Jog switch] is pressed, the display will blink quickly
Jog switch.
3 times and the threshold value for '2_SL' will be confirmed.
Press the MODE key
0 Press the [MODE key] 4 times or keep it pressed for 2 sec.
4 times or keep it pressed
for 2 sec. or more. or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
21
' direction.
' direction.