Data Bank Save Setting Function - Sunx FX-301 Operation Manual

7-3. Data Bank Save Setting Function

This function saves amplifier configuration settings.
Up to 3 sets of configuration settings information can be saved in '
Turn the Jog switch to select the
desired channel for saving.
Channel 1
The digital display will blink twice
and the procedure will be complete.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the MODE
key 5 times.
Turn the Jog switch
3 times toward the
' '
direction.
Press the
Jog switch.
Turn the Jog switch
once toward the
' ' direction.
Press the
Jog switch.
Channel 2 Channel 3
Press the
Jog switch.
Press the
Jog switch.
Press the MODE key
3 times or keep it pressed
for 2 sec. or more.
' ' ' and '
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Turn the [Jog switch] 3 times toward the '
to select 'PRO3 mode'.
3 Press the [Jog switch] to enter the 'data bank load setting'
state.
4 Turn the [Jog switch] once toward the '
to enter the 'data bank save setting' state.
5 If the [Jog switch] is pressed, the digital display will blink.
6 If the [Jog switch] is turned, the 'channel' will be changed.
Select the desired 'channel' for saving.
7 If the [Jog switch] is pressed, the letters '
8If the [Jog switch] is pressed while '
configuration settings will be saved to the selected
'channel'. The digital display will blink twice and the
procedure will be complete.
9 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
42
' .
' direction,
' direction,
' will blink.
' is blinking, the