Others; Precautions When Selecting Settings - Sunx FX-301 Operation Manual

3

Others

3-1. Precautions When Selecting Settings

Canceling operations
To cancel any operation, press the [MODE key]. If the [MODE key] is pressed once, the unit will return to
the previous settings status immediately before the [Jog switch] was pressed.
Example: When operating in PRO mode.
To cancel
Confirming settings
When changing the status of any setting, ensure that the selected setting is subsequently confirmed.
If confirmation is not performed, the new setting will not take effect.
Example: When setting response time change.
(In case of FX-301)
H-SP FAST S-D
(ultra high-speed) (high-speed) ( reduced intensity )
Turn the Jog switch to select
the desired mode.
The digital display will quickly blink 3 times to
confirm the setting.
Setting protection
You can use the 'key lock function' to protect settings. (Refer to p.59.)
Key lock function
This function can be used to prevent the operator from accidentally changing the sensor settings.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the Jog
switch.
Press the MODE
key once.
Press the
Jog switch.
STD LONG
(standard) (long-range)
Press the
Jog switch.
1Select 'PRO mode'.
2If the [Jog switch] is pressed once, the unit will enter
the 'response time change' state.
3To cancel the 'response time change' operation,
press the [MODE key] once.
4The display will return to the previous [PRO1 mode]
selection screen.
1Select 'response time change'.
2If the [Jog switch] is pressed, the current mode
will be displayed.
* The factory setting is 'STD (standard)'.
3If the [Jog switch ] is turned, the digital display
will blink.
Select the desired mode.
4If the [Jog switch] is pressed, the digital display
will quickly blink 3 times, confirming the setting.
3