Output Operation Setting Mode - Sunx FX-301 Operation Manual

4-6. Output Operation Setting Mode

This mode allows the selection of output operation
from either L-ON (Light-ON) or D-ON (Dark-ON).
In case of FX-301(P)(-HS)
Turn the Jog switch to select the
desired output.
The current
setting
The digital display will quickly
blink 3 times to confirm the selection.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the
MODE key
3 times.
In case of FX-305(P)
Output 1
Press the
Jog switch.
Turn the
Jog switch.
Press the
Jog switch.
Press the MODE key
3 times or keep it pressed
for 2 sec. or more.
Output operation
FX-301(P)(-HS) or FX-305(P) normal mode
Output
operation
L-ON
OFF ON
D-ON
ON OFF
Threshold value
When setting rising differential
mode for FX-305(P)
Incident light
intensity
Output operation
L-ON ON
T
(Light-ON)
OFF
D-ON
ON
T
(Light-OFF)
OFF
1 Press the [MODE key] 3 times to select 'output operation
setting mode'.
Output 2
2 FX-305(P): Turn the [Jog switch] to select the desired
'output' for setting.
3 If the [Jog switch] is pressed, the 'output' will be confirmed.
4 The current setting will be displayed.
* The factory setting is 'L-ON (Light-ON)'.
5 If the [Jog switch] is turned, the opposite setting for output
operation will blink on the display.
6 If the [Jog switch] is pressed, the digital display will blink quickly
3 times and the selected output operation will be confirmed.
7 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
22
FX-305(P) window comparator mode
Output
operation
L-ON
OFF ON
D-ON
ON OFF
Incident
light
intensity
Threshold Threshold
value 1 value 2
(1_SL) (2_SL)
When setting trailing
differential mode for FX-305(P)
Incident light
intensity
Output operation
Time
L-ON ON
T
(Light-ON)
OFF
D-ON ON
T
(Light-OFF)
OFF
OFF
ON
Incident
light
intensity
Time
T T
T T