Sunx FX-301 Operation Manual page 31

Without timer OFF-delay ON-delay
Turn the Jog switch to select
the desired timer operation.
Turn the Jog switch to select
the desired timer period.
When using the ON-delay • OFF-delay
timer combination or the ON-delay •
ONE SHOT timer combination
In case of
ON-delay • OFF-delay
Turn the Jog switch to select
the desired timer period.
Turn the Jog switch to select
the desired timer period.
The digital display will quickly
blink 3 times to confirm the setting.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
ON-delay • OFF-delay ON-delay • ONE SHOT
ONE SHOT
(Output 1 only) (Output 1 only)
Press the
Jog switch.
Press the Jog switch.
In case of
ON-delay •
ONE SHOT
Press the
Jog switch.
Press the MODE key
3 times or keep it
pressed for 2 sec.
or more.
7 If the [Jog switch] is turned, the digital display will blink.
Select the desired timer operation.
* Timer selection is also possible in 'NAVI mode'.
8 Press the [Jog switch] to enter the 'timer period setting' state.
* The factory setting is '10 ms'.
9 Turn the [Jog switch] to select the desired timer period .
When using the ON-delay • OFF-delay timer combination or
the ON-delay • ONE SHOT timer combination, each timer
can be set individually.
* Timer period will be switched to the values set by timer
operations, unless 'Without timer' is chosen.
0 Sets the timer period for the ON-delay timer.
A Sets the OFF-delay timer period for ON-delay • OFF-delay
timer settings, and the ONE SHOT timer period for
ON-delay • ONE SHOT timer settings.
B If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the setting.
C The output that has been set will be displayed.
D Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
30