Light Emitting Amount Selection Function - Sunx FX-301 Operation Manual

5-8. Light Emitting Amount Selection Function

This function allows changing of the light emitting amount. The levels that can be selected will vary depending on
the response time.
• FX-301(P)
FAST, STD, LONG: 4-levels H-SP: 3-levels S-D: 2-levels
• FX-301(P)-HS FAST, STD, LONG: 4-levels H-SP, S-D: 2-levels
• FX-305(P)
FAST, STD, STDF, LONG, U-LG: 4-levels H-SP: 3-levels
Level 4 Level 3 Level 2
Turn the Jog switch to select
the desired light emitting amount level.
The digital display will quickly
blink 3 times to confirm the setting.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the MODE
key 5 times.
Turn the Jog switch
once toward
the ' ' direction.
Press the
Jog switch.
Press the Jog switch
5 times toward
the ' ' direction.
Press the
Jog switch.
Level 1 0 %
Press the
Jog switch.
Press the MODE key
3 times or keep it pressed
for 2 sec. or more.
34
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Turn the [Jog switch] once toward the '
to select 'PRO1 mode'.
3 Press the [Jog switch] to enter the 'response time change'
state.
4 Turn the [Jog switch] 5 times to enter the 'light emitting
amount level selection' state.
5 If the [Jog switch] is pressed, the current 'light emitting
amount level' will be displayed.
* FX-301(P), FX-305(P): The factory setting is 'level 4 (MAX.)'.
FX-301(P)-HS: The factory setting is 'level 2'.
6 If the [Jog switch] is turned, the current 'light emitting amount level' will be displayed.
Set to the desired 'light emitting amount level' from 'light
emitting OFF' or between 'level 1' and 'level 4'.
* The levels that can be selected will vary depending on the response time.
• FX-301(P) FAST, STD, LONG: 4-levels H-SP: 3-levels S-D: 2-levels
• FX-301(P)-HS FAST, STD, LONG: 4-levels H-SP, S-D: 2-levels
• FX-305(P) FAST, STD, STDF, LONG, U-LG : 4-levels H-SP: 3-levels
7 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the 'light emitting amount level'
setting.
8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
* When the light emitting is set to OFF and the unit returns
to RUN mode (normal sensing operation), '
displayed.
' direction,
' will be