Pro2 Mode; Pro2 Mode Functions And Settings - Sunx FX-301 Operation Manual

6

PRO2 Mode

6-1. PRO2 Mode Functions and Settings

PRO2 mode is used mainly for selecting the detailed configuration of the digital display.
:Digital Display Setting Function
Refer to p.37 for setting procedure
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
This function allows the display to be switched among the different digital displays:
[incident light intensity display / percentage display / peak hold display / bottom
hold display / changed intensity display (Note)].
* The factory setting is 'incident light intensity display'.
Note: For FX-305(P), when the differential mode '
changed incident light intensity is displayed.
Incident light intensity display
This function displays the
incident light intensity within
a range of 0 to 4,000.
[FX-305(P): 0 to 9,999 max.]
display
Peak hold
This function displays the
peak numerical value of
the incident light intensity.
display
Bottom hold
This function displays the
bottom numerical value of
the incident light intensity.
Display Timing for Peak Hold and Bottom Hold
Please note that the peak hold and bottom hold values will be refreshed
consecutively.
Incident light intensity
2068
1820
705
146
Peak
hold
Bottom
hold
35
' or ' ' is set in PRO6 mode setting, the
Percentage display
This function displays the incident light intensity
within a range of 1 P (1 %) to 999 P (999 %),
based on the threshold value as a reference.
Alternating display
Alternating display
Display indicates the Display indicates the
peak value or bottom peak value or bottom
value within the value within the
graph area ' '. graph area '
Time
'.