Sunx FX-301 Operation Manual page 20

4-4. Threshold Value Fine Adjustment Mode [when using FX-301(P)(-HS) or FX-305(P) normal mode]
This mode allows fine adjustment of the 'threshold value' setting.
In case of FX-301(P)(-HS)
Output 1
Turn the Jog switch to select the
desired output.
The current
threshold
value
In case of
turning toward
the ' '.
Turn the Jog switch to set the
desired threshold value.
In case of
changing
threshold value
to 35.
The digital display will quickly
blink 3 times to confirm the value.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the
MODE key twice.
In case of FX-305(P)
Output 2
Press the
Jog switch.
Turn the
Jog switch.
Press the
Jog switch.
Press the MODE key
4 times or keep it pressed
for 2 sec. or more.
19
1 Press the [MODE key] twice to select 'threshold value fine
adjustment mode'.
2 FX-305(P): Turn the [Jog switch] to select the desired 'output'
for setting.
3 If the [Jog switch] is pressed, the 'output' will be set.
4 The current 'threshold value' will be displayed.
* The factory setting is;
FX-301(P): 40, FX-301(P)-HS: 80
FX-305(P) output 1: 80, FX-305(P) output 2: 120
5 If the [Jog switch] is turned toward the '
the 'threshold value' will change and the new value will blink.
If an increased 'threshold value' is desired,
turn the [Jog switch] toward the '
If a decreased 'threshold value' is desired,
turn the [Jog switch] toward the '
* When using the FX-301(P) in LONG mode, it is
recommended that you set the threshold value to '15 digits'
or more.
6If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the setting of the currently
displayed 'threshold value'.
7Press the [MODE key] 4 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
' or ' ' direction,
' direction.
' direction.