Backup Setting Function - Sunx FX-301 Operation Manual

8-6. Backup Setting Function

When using units such as the FX-CH2, this function does not store the threshold values in the EEPROM when
teaching via external input. This prevents frequent overwriting of data in the EEPROM.
Backup
ON
Turn the Jog switch to
select from either ON or OFF .
The digital display will quickly
blink 3 times to confirm the setting.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the MODE
1 Press the [MODE key] 5 times to select 'PRO mode'.
key 5 times.
Turn the Jog switch
2 Turn the [Jog switch] 4 times toward the
4 times toward the
' ' direction.
Press the
3 Press the [Jog switch] to enter the 'setting condition copy
Jog switch.
Turn the Jog switch
5 times toward the
4 Turn the [Jog switch] 5 times toward the '
' ' direction.
Press the
5 If the [Jog switch] is pressed, the current setting will be
Jog switch.
Backup
OFF
6 If the [Jog switch] is turned, the digital display will blink.
Press the
7 If the [Jog switch] is pressed, the digital display will quickly
Jog switch.
Press the MODE key
3 times or keep it pressed 8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
for 2 sec. or more.
48
select 'PRO4 mode'.
setting' state.
enter the 'backup ON / OFF setting' state.
displayed.
* The factory setting is 'Backup ON'.
Select from either 'Backup ON' or 'Backup OFF'.
blink 3 times, confirming the setting.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
' ' direction, to
' direction, to