Digital Display Inversion Function - Sunx FX-301 Operation Manual

6-3. Digital Display Inversion Function

This function can be used to invert the display orientation, according to the direction of amplifier installation.
Turn OFF
Turn the Jog switch to select
the desired display orientation.
The digital display will quickly
blink 3 times to confirm the setting.
In case of
Turn ON
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Press the MODE
1 Press the [MODE key] 5 times to select 'PRO mode'.
key 5 times.
Turn the Jog switch
twice toward the
2 Turn the [Jog switch] twice toward the '
' ' direction.
to select 'PRO2 mode'.
Press the
3 Press the [Jog switch] to enter the 'digital display setting' state.
Jog switch.
Turn the Jog switch
once toward the 4 Turn the [Jog switch] once toward the '
' ' direction.
to enter the 'digital display inversion setting' state.
Press the
5 If the [Jog switch] is pressed, the current 'display orientation'
Jog switch.
will be displayed.
* The factory setting is 'Turn OFF'.
Turn ON
6 If the [Jog switch] is turned, the digital display will blink.
Select the desired 'display orientation'.
Press the
7 If the [Jog switch] is pressed, the digital display will quickly
Jog switch.
blink 3 times, confirming the 'display orientation' setting.
Press the MODE key
3 times or keep it pressed
8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
for 2 sec. or more.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
To return the display to the original state, select the
'Turn OFF' setting.
38
' direction,
' direction,