Functional Description; Setting Procedure - Sunx FX-301 Operation Manual

1

Functional Description

1-1. Functional Description
1 FX-301(P)(-HS): Operation indicator (Orange)
FX-305(P): Output 1 operation indicator (Orange)
2 FX-301(P)(-HS): Stability indicator (Green)
FX-305(P): Output 2 operation indicator (Orange)
Operation indicator (Orange) ... FX-301(P)(-HS) : Lights up when output is ON.
1
Output 1 operation indicator (Orange) ... FX-305(P)
2 Stability indicator (Green)
Output 2 operation indicator (Orange) ...
3 MODE indicator
4 Jog switch
5 MODE key

1-2. Setting Procedure

The [MODE key] and [Jog switch] are utilized to configure various settings.
1
Press the [MODE key]
(mode selection / cancellation)
Cancel: If the [MODE key] is pressed, the unit will return to the previous settings status, immediately before the
[Jog switch] was pressed (the selected setting has been confirmed).
Selection and confirmation of settings are performed according to the order of the numbers, as shown on the amplifier: 1, 2 and 3.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
MODE indicator
3
, and
: Lights up when output 1 is ON.
FX-301(P)(-HS) : Lights up when the incident light intensity is great enough for stable operation.
...
FX-305(P) : Lights up when output 2 is ON.
... RUN (Green) : Lights up during normal sensing operation.
TEACH (Yellow) : When this indicator lights up, the 'threshold value' can be set by
utilizing either '2-level teaching', 'limit teaching' or 'full-auto teaching'.
When the FX-305(P) is in window comparator mode, the 'threshold
value' can be set by either '1-level teaching', '2-level teaching' or
'3-level teaching' whenever this indicator lights up.
ADJ (Yellow) : When this indicator lights up, fine adjustment of the 'threshold value'
can be performed.
L/D (Yellow) : When this indicator lights up, the output operation can be set.
TIMER (Yellow) : When this indicator lights up, timer operation can be set.
(Timer period can be set in PRO1 mode.)
When this indicator lights up, further advanced functions, such as the
PRO (Yellow) :
copying and memory functions, can be set.
... Turning this switch in the '
selection and pressing the switch then confirms the selected setting.
... This key is used to select operating modes and to cancel settings during the configuration process.
2
Turn the [Jog switch] in the ' ' or ' ' direction
(chooses setting for selection)
4 Jog switch
are in the correct order for selecting settings.
' or ' ' direction, allows different items to be viewed for
3
1
5 MODE key
Press the [Jog switch]
(confirms the selected setting)