Sunx FX-301 Operation Manual page 27

: Shift Function
Refer to p.33 for setting procedure
: Light Emitting Amount Selection Function
Refer to p.34 for setting procedure
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Limit Teaching
Shifts the 'threshold value' by a certain percentage increment during 'limit teaching'.
(The percentage adjustment is variable from 0 to 80 %, in increments of 5 %).
* The factory setting is '15 %'.
When using reflective type fiber
If the threshold value is
shifted toward the ' ' direction,
minute and severe detections
become possible.
When using thru-beam type fiber
If the threshold value is
shifted toward the ' ' direction,
minute and severe detections
become possible.
Changes the light emitting amount selection setting. The levels that can be
selected will vary depending on the response time.
• FX-301(P)
FAST, STD, LONG: 4-levels H-SP: 3-levels S-D: 2-levels
• FX-301(P)-HS FAST, STD, LONG: 4-levels H-SP, S-D: 2-levels
• FX-305(P)
FAST, STD, STDF, LONG, U-LG: 4-levels H-SP: 3-levels
Level 4 Light emitting amount Hi
Level 3
Level 2
Light emitting amount Lo
Level 1
Emission halt
26
+
15 % higher when using reflective
type fiber (factory setting)
100%
+
15 % lower when using thru-beam
type fiber (factory setting)
0
The threshold value is variable from
0 to 80 % (in increments of 5 %).
Not incorporated
FX-301(P)(-HS): in H-SP and S-D mode
FX-305 : in H-SP mode
FX-301(P) : in S-D mode
FX-301(P)-HS : in H-SP and S-D mode