Eco Mode Setting Function - Sunx FX-301 Operation Manual

6-4. ECO Mode Setting Function

This function turns off the digital display to reduce current consumption.
If no operations are performed for 20 sec., the letters '
If the [MODE key] or the [Jog switch] are operated, the digital display will light up again.
When set to ECO OFF
ECO
OFF
The digital display will quickly
blink 3 times to confirm the setting.
Only when
ECO ON
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
When set to ECO ON
Press the MODE
key 5 times.
Turn the Jog switch
twice toward the
' ' direction.
Press the
Jog switch.
Turn the Jog switch
twice toward the
' ' direction.
Press the
Jog switch.
ECO
ON
Turn the Jog switch to
select either ON or OFF.
Press the
Jog switch.
Press the MODE key
3 times or keep it
pressed for 2 sec. or
more.
No operation has been
performed for 20 sec.
Operating either the MODE
key or the Jog switch causes
the display to light up again.
' will blink and then the digital display will turn off.
When ECO mode is OFF:
40 mA or less (at 24 V supply voltage)
When ECO mode is ON:
25 mA or less (at 24 V supply voltage)
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Turn the [Jog switch] twice toward the '
to select 'PRO2 mode'.
3 Press the [Jog switch] to enter the 'digital display setting' state.
4 Turn the [Jog switch] twice toward the '
the 'ECO mode setting' state.
5 If the [Jog switch] is pressed, the current setting will be
displayed.
* The factory setting is 'ECO OFF'.
6 If the [Jog switch] is turned, the digital display will blink.
Select from either 'ECO ON' or 'ECO OFF'.
7 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the setting.
8Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more, the amplifier will return to 'RUN mode' (normal
sensing operation).
9Only when the unit is set to ECO ON and no operations
are performed for 20 sec., will the letters '
the digital display then turn off.
0 If the [MODE key] or the [Jog switch] are operated,
the digital display will light up again.
To return the unit to the original state, select the setting
'ECO OFF'.
39
Current Consumption
' direction,
' direction, to enter
' blink and