Exit Diags - Konica Minolta Bizhub 4700P Service Manual


NV mirror entries

9xx and 1xx (print engine) service error entries

Programming error entries

Maintenance count reset entries

Clear log entries

Paper jam entries

Firmware update entries

JFFS2 partition format entries

USB setup pkt info entries

Supply event entries
To print the Event log:
From the Diagnostics menu, navigate to Event Log >Print Log.
Print Log Summary
The event log summary is printed.
To print the Event log summary:
From the Diagnostics menu, navigate to Event Log >Print Log Summary.
Clear Log
Use this to remove all the current information in the Event log. This affects both the viewed log and the
printed log information.
To clear the event log:
1. From the Diagnostics menu, navigate to:
Event Log >Clear Log
2. Choose any of the following:
- Yes—To clear the Event log
- No—To exit the Clear log menu

5.3.14 Exit Diags

Select this to exit the Diagnostics menu. The printer performs a POR and restarts in normal mode.
bizhub 4700P/bizhub 4000P Service Manual
- 159 -