Konica Minolta Bizhub 4700P Service Manual page 82

Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:

From the printer control panel, select Continue to stop the defragmentation and continue printing.
Press [OK] to confirm.

Delete fonts, macros, and other data from the printer memory.

Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
The printer deleted some held jobs in order to process current jobs.
Select Continue to clear the message. Press [OK] to confirm.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:

From the printer control panel, select Continue to clear the message. Press [OK] to confirm.

Delete other held jobs to free up additional printer memory.
Load [paper source] with [custom string] [paper orientation]
Try one or more of the following:

Load the tray or feeder with the correct size and type of paper.

To use the tray that has the correct size or type of paper, select Finished loading paper on the
printer control panel. Press [OK] to confirm.
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from
the default paper source.

Cancel the current job.
Load [paper source] with [custom type name] [paper orientation]
Try one or more of the following:

Load the tray or feeder with the correct size and type of paper.

To use the tray that has the correct size or type of paper, select Finished loading paper on the
printer control panel. Press [OK] to confirm.
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from
the default paper source.

Cancel the current job.
bizhub 4700P/bizhub 4000P Service Manual
- 81 -