4. Remove the two screws (A) securing the rear cover.
5. Press the two latches to release the rear cover.
6.7.3
Narrow media/bin full sensor removal
1. Remove the right cover. See
2. Remove the left cover. See
3. Remove the rear door and cover. See
4. Remove the top cover. See
5. Disconnect the cable JNRW1 from the controller board.
6. Remove the six screws (A) securing the sensor and upper exit guide to the redrive assembly.
bizhub 4700P/bizhub 4000P Service Manual
Right cover
removal.
Left cover
removal.
Rear door and cover
Top cover
removal.
- 244 -
removal.