Bottom Removals; Power Supply Removals - Konica Minolta Bizhub 4700P Service Manual

6.6 Bottom removals

6.6.1

Power supply removals

1. Remove the left cover. See
2. Remove the rear door and cover. See
3. Disconnect the cable (A) from the rear, and disconnect the cable (B) from the left side.
4. Position the printer so that it sits on its right side.
5. Remove the three screws (C), and then remove the right tray guide.
bizhub 4700P/bizhub 4000P Service Manual
Left cover removal.
Rear door and cover
- 227 -
removal.