Option Tray Acm Motor Service Check - Konica Minolta Bizhub 4700P Service Manual

Action
Step 2
Check the cable J10 on the option tray controller card.
Is it properly connected and free of damage?
Step 3
Check the separator roll assembly for wear or damage.
Is it free of wear or damage?
4.8.4

Option tray ACM motor service check

Action
Step 1
Check the cable J11 on the option tray controller card.
Is it properly connected?
Step 2
1. Remove the option tray insert and bypass the tray
present sensor.
2. POR into the Diagnostics Menu and perform a
feed test:
Diagnostics Menu >Feed Test > choose an
option tray
3. Check the ACM for proper operation.
Does the ACM freely rotate three times before
displaying a jam message?
Step 3
Is the ACM gear free of wear or damage?
bizhub 4700P/bizhub 4000P Service Manual
- 142 -
Yes
Go to step 3.
Contact the next level of
support.
Yes
Go to step 2.
Go to step 3.
Contact the next level of
support.
No
Replace the tray.
Replace the separator roll
assembly. See Separator
roll assembly removal.
No
Reseat the cable.
Replace the ACM
assembly. See ACM
assembly removal.
Replace the ACM
assembly. See ACM
assembly removal.