3
3.4.4
01 Stapler Position Adj. \ 04 Exit Guide Center Adj.
Perform this adjustment for the center position of exit guides of the Finisher
FS-521.
[05 Exit Guide Paper Width] is supposed to be completed before this
adjustment.
To specify Exit Guide Center Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [04
Exit Guide Center Adj.].
The Exit Guide Center Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
3-30
Adjustment
bizhub PRO C6501