Procedures For Updating The Firmware Via Usb Connection - Konica Minolta Bizhub 4700P Service Manual
Hide thumbs
Also See for Bizhub 4700P:
- Quick reference (2 pages) ,
- User manual (212 pages) ,
- Quick reference manual (31 pages)
Table of Contents
Advertisement
5.9.3
Procedures for updating the firmware via USB connection
The following procedure explains the firmware update when the printer is connected to PC by using
USB cable.
NOTE: Before updating the firmware, install the printer drivers on the PC used for the firmware
update.
4. Store the firmware file (xxxx.fls) and an update tool (USBFlash.exe) which are compatible with the
product in an arbitrary directory of the PC.
5. Connect the PC with the printer using a USB cable.
6. Double-click the USBFlash.exe to start the update tool.
7. Click the [Browse Files] to open the firmware file stored directory.
8. Select the required firmware file and then click [Open].
9. Confirm that the correct firmware file is listed under [ENTER FILENAME TO FLASH TO PRINTER].
10. Confirm that the correct printer model is listed under [SELECT PRINTER FROM LIST]. If not, click
on the drop-down arrow to locate and select the correct printer.
11. Click [START].
bizhub 4700P/bizhub 4000P Service Manual
- 171 -
Advertisement
Table of Contents
