Skewed Print - Konica Minolta Bizhub 4700P Service Manual

Actions
Step 5
1. Turn off the printer.
2. Remove the rear door and cover.
3. Disconnect the fuser cable connected
to PCN5 of the power supply.
4. Check for approximate correct
resistance on the fuser cable:
- 220V fuser—43 ohms
- 110V fuser—10 ohms
- 100V fuser—8 ohms
Is the resistance equal to any of the above
values?
4.2.7

Skewed print

Actions
Step 1
1. POR into the Diagnostics menu and
perform a print test:
Diagnostics Menu >Print
Tests >Tray 1
2. Adjust the margins if necessary:
Diagnostics Menu >Registration
Does the error remain?
Step 2
Does the skew appear every two pages?
Step 3
1. Check the media source.
2. If the media is from tray 1, go to step 4.
If the media is from the MPF, go to step
6.
bizhub 4700P/bizhub 4000P Service Manual
Yes
The problem is solved.
Yes
Go to step 2.
Go to step 9.
- 35 -
No
Replace the fuser. See Fuser
removal.
No
The problem is solved.
Go to step 3.