Paper Jams - Konica Minolta Bizhub 4700P Service Manual

Action
Step 5
1. Remove the input tray.
2. POR into the Diagnostics menu and perform a
duplex sensor test:
Diagnostics Menu >Duplex Tests >Sensor Test
3. Lower the duplex jam door, and toggle the duplex
sensor.
Does the sensor state on the control panel display
change when it is toggled?
Step 6
Does the error remain?
4.3.7

241 paper jams

[x]-page jam, open tray [x]. [24y.xx]
1. Pull the tray completely out of the printer.
Note: The message on the printer display indicates the tray where the jammed paper is located.
2. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
bizhub 4700P/bizhub 4000P Service Manual
- 61 -
Yes
Go to step 6.
Contact the next level of
support.
No
Replace the duplex
sensor. See Duplex
sensor and input sensor
removal.
The problem is solved.