General Information; Media Guidelines; Paper Guidelines - Konica Minolta Bizhub 4700P Service Manual

Hide thumbs Also See for Bizhub 4700P:
Table of Contents

Advertisement

3. General information

The KONICA MINOLTA bizhub 4700P and 4000P are network-capable, multi-function laser printers that
print monochrome print jobs. All information in this service manual pertains to all models unless
explicitly noted.
The printers are available in the following models:
Model
Configurations
bizhub 4000P /
Network (Gigabit), Duplex printer with additional 250
or 550-sheet tray
bizhub 4700P
The diagnostic information in this manual leads you to the correct field replaceable unit (FRU) or part.
Use the error code charts, symptom index, and service checks to determine the symptom and then
repair the failure. After you complete the repair, perform tests as needed to verify the repair.
To begin diagnosing a problem, go to
about removing and reinstalling parts. See Parts Guide Manual to help identify parts.

3.1 Media guidelines

3.1.1

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a
sample of the paper or specialty media before buying large quantities.
Paper characteristics
The following paper characteristics affect print quality and reliability. Consider these characteristics
when evaluating new paper stock.
Weight
The printer trays can automatically feed paper weights up to 120-g/m
The multipurpose feeder can automatically feed paper weights up to 163-g/m
paper. Paper lighter than 60 g/m
best performance, use 75-g/m
(7.2 x 10.1 inches), we recommended to use 90 g/m
Note: Two-sided printing is supported only for 60–90-g/m
Curl
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems.
Curl can occur after the paper passes through the printer, where it is exposed to high temperatures.
Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to
paper curling prior to printing and can cause feeding problems.
bizhub 4700P/bizhub 4000P Service Manual
Diagnostic
information. See
2
(16 lb) might not be stiff enough to feed properly, causing jams. For
2
(20-lb) bond grain long paper. For paper smaller than 182 x 257 mm
- 19 -
Repair information
2
(32-lb) bond grain long paper.
2
(24 lb) or heavier paper.
2
(16–24-lb) bond paper.
for information
2
(43-lb) bond grain long

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 4000p

Table of Contents