Error code
Description
244.24
DC Feed autocompensator stalled on the last
pick attempt in tray 4.
244.32
Tray not ready.
244.33
Pick received but detected a tray pulled.
244.41
ACM motor stalled.
244.42
ACM motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
244.43
ACM motor ramp (end ramp - did not reach
speed, typical pack feed paper jam).
244.44
Separator/Pass-through
244.45
Separator/Pass-through
error (underspeed). Motor underspeed (max
PWM and motor underspeed, typical
accordion jam).
244.46
Separator/Pass-through
ramp - did not reach speed, typical pack feed
paper jam).
244.47
ACM motor stalled.
244.48
ACM motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
244.49
ACM motor ramp (end ramp - did not reach
speed, typical pack feed paper jam).
Option tray jam service check
Action
Step 1
Restart the printer.
Does it fail to complete the POST sequence and display
a 242.01 error?
bizhub 4700P/bizhub 4000P Service Manual
motor stalled.
motor PWM overflow
motor ramp (end
- 73 -
Action
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Go to
Option tray jam service
Yes
Replace the option tray.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
No
Go to step 2.