Explanation Of The Parameters - Siemens SIMATIC S5 Manual

6.3.4

Explanation of the Parameters

SSNR :
X
Specification of the page number (cf. switch setting J64, Section 3.3.2 "Setting the Module
Address") of the appropriate axis.
D, KYx,y
Specification of the data block type and data block number of the axis data block. With the pro-
grammable controllers S5-1 15U and S5-150U, it is not possible to program the data block type
DX.
Y
DWNR :
Specification of the first data word in the axis data block.
x = first data word
x = interface (page number)
O L <255
X
x = data block type
x
x ><0 : data block type DX
=
data block number
5 S-y L255
1 < y L255
direct parameter assignment via the block parameters
indirect parameter assignment via the data block open before the
OS-
X
where: 5&parameter DBNR <163 and
4&—
X <241
where: parameter DBNR = 165 (DB165 = working DB for
where: parameter DBNR = 164 (DB164 = working DB for
standard function block FBI 64)
Standard Function B/ock FB165
where x = O
where x >< 0
6-31