Entering Machining Programs According To Din - Siemens SIMATIC S5 Manual

If you press the EXIT key, you will be prompted to confirm abandoning the machining
program, if you answer with YES you return to the basic display (function selection)
and if you answer NO you continue with machining program input.

Entering Machining Programs according to DIN

5.6.2.3
In the DIN representation, only one statement of a traversing program can be written per line.
Each statement must begin with the statement type and statement number.
The IP247 processes all statements as "normal statements". Normal statements are identified by
"N", The statement identifiers "/N" for "suppressable statements" and ":N" for "main statement"
are permitted, however, they have no significance.
The statement number comprises a maximum three digit number. The range of values is 0,..999.
Apart from the N-function (statement type and statement number) the following functions are per-
mitted:
L-function (subroutine call)
G-function (preparatory positioning condition)
X-function (target function)
F-function (speed, time, loop repetitions)
M-function (auxiliary function)
Input
5 - 3 7