Output Machining Program - Siemens SIMATIC S5 Manual
Positioning module
1p 247
for stepper motors
Hide thumbs
Also See for SIMATIC S5:
- Manual (396 pages) ,
- Equipment manual (197 pages) ,
- Operating instructions manual (43 pages)
Table of Contents
Advertisement
Output Machining Program
5.7.2
Description of the output fields
OUTPUT and M A C H I N I N G P R O G R A M are displayed in the header. me previously
selected source device is displayed in DEVICE and the DB no. in BLOCK.
Description of the input fields
The machining program of the selected data block is displayed. You can change individual state-
ments and to write them back to the source device with the function key <F62= (SAVE). Other-
wise, the display is the same as for the input of machining programs.
output
5 - 4 3
Advertisement
Table of Contents
