Siemens SIMATIC S5 Manual page 141

Introduction
You can now enter the actual machine data in the nine input fields (shown on a grey back-
ground).
Travel data and speeds always refer to the measuring system selected in the machine data re-
cord. The appropriate dimension is therefore always displayed following input fields and output
fields involving dimensions.
Using the function keys <Fl > and <F2> you can call further machine data pages. With func-
tion key cF4> you can print out the machine data on a connected printer. By pressing function
key <F6> you can transfer all the machine data to the selected device. <F8> brings you back
to the basic menu without transferring the machine data.
5 - 4