Siemens SIMATIC S5 Manual page 171

Lines per page:
Here, you specify the number of lines per page.
Columns per page:
In this field you specify the number of columns per page.
Print type 1:
For the PT88 printer, the control characters (ODH), ESC (1 BH), '[l w' (5BH, 31 H, 77H) and
the string end character 17H are defaults. This printer then prints normal print with 17 char-
acters per inch.
Print type 2:
For the PT88 printer, the control characters (ODH), ESC (1 BH), '[2w' (5BH, 32H, 77H) and
the string end character 17H are defaults. This printer then prints condensed print with 12
characters per inch.
Print type 3:
For the PT88 printer, the control characters (ODH), ESC (1 BH), '[4w' (5BH, 34H, 77H) and
the string end character 17H are defaults. This printer then prints super-condensed print
with 10 characters per inch.
ASCII :
For the PT88 printer, the control characters ESC (1 BH), '(B' (28Ft, 42H) and the string end
character 17H are defaults, This printer then prints with the ASCII character set.
Expanded on:
For the PT88 printer, the control characters ESC (1 BH), '8' (38H) and the string end char-
acter 17H are defaults. Expanded print is then set on this printer. Each character is then
printed in double width.
Expanded off:
For the PT88 printer, the control characters ESC (1 BH), 'c' (3CH) and the string end char-
acter 17H are defaults. This switches off expanded print on this printer. Each character is
then once again printed in normal width.
For IBM or EPSON printers please refer to the control characters in the appropriate manual.
5-34