Siemens SIMATIC S5 Manual page 290

continuation from page 20 (FB164)
:
no error
1: PG job Iistfull ~
2: job not permitted ~
3: statement saved
axis active ==> entry not possible
5: PC job list is full *)
motor waiting for external start
speed range exceeded
8: status after power down on module
9: free
10: reference point does not exist
11: free
12: correct MD - module number cannot be changed ~
13: data block doas not exist
14: wrong or no machine data
15: error in machine data
17: overwrite machine data?
18: max. number of programs reached
19: data block doas not exist
20: overwrite machining program?
21: free
22: processing more than one reach. prog. not permitted
23: traversing range exceeded
24: not enough space for machining program
25: start limit switch tripped
26: end limit switch tripped
27: external STOP received
28: software start limit switch tripped
software end limit switch tripped
29:
30: mode not permitted in teach-in ~
31: free
32: free
33: cycle time exceeded
pulse generator defect
35: error at start of statement
subroutine DB no. too high
G function not permitted
37:
38: closed loop only as outer loop
39: nesting depth exceeded
X function wrong
41:
F function wrong
traversing distance too long
continued on page 24
with *)
are listed from page 35 onwards.
-
01
)
)
)
)
I
7 - 2 3