Parameters/Address Space; Parameters; Explanation Of Parameters; Configuration Control - Siemens IM 155-6 PN ST Equipment Manual

Parameters/address space

4.1

Parameters

Parameters for IM 155-6 PN ST interface module
The following table shows the parameters for the IM 155-6 PN ST interface module.
Table 4- 1
Parameters

Configuration control

4.2

Explanation of parameters

4.2.1 Configuration control
You can use this parameter to enable the configuration control function in the ET 200SP
distributed I/O system.
Note
If you configure the enable, the ET 200SP distributed I/O system requires a control data
record 196 from the user program in order for the ET 200SP distributed I/O system to operate
the I/O modules.
Reference
You can find more information in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual and in the
STEP 7 online help.
IM 155-6 PN ST interface module (6ES7155-6AU01-0BN0)
Equipment Manual, 10/2020, A5E03576904-AE
Parameters for interface module IM 155-6 PN ST (GSD file)
Value range
Disable/enable
Default Efficiency range
Disable ET 200SP
4
23