Removing An Operational Nvme Device From An Ibm I Logical Partition - IBM Power System E950 Manual

• Running the AIX command to check the amount of remaining life in NVMe devices (www.ibm.com/
support/knowledgecenter/POWER9/p9hak/pxhak_nvme_remaining_life_aix.htm)
• Running the IBM i command to check the amount of remaining life in NVMe devices (www.ibm.com/
support/knowledgecenter/POWER9/p9hak/pxhak_nvme_remaining_life_ibmi.htm)
• Running the Linux command to check the amount of remaining life in NVMe devices (www.ibm.com/
support/knowledgecenter/POWER9/p9hak/pxhak_nvme_remaining_life_linux.htm)
Related information
"Removing an operational NVMe device from an IBM i logical partition" on page 29
Learn how to remove an operational NVMe device from an IBM i logical partition.

Removing an operational NVMe device from an IBM i logical partition

Learn how to remove an operational NVMe device from an IBM i logical partition.
The IBM i operating system provides commands that you can use to remove an operational NVMe device.
For details, see Removing an operational NVMe device from a partition in the IBM i Knowledge Center.
Note: To navigate to the page in the IBM i 7.4 Knowledge Center, select Systems management > Disk
management > Disk management checklist > Removing an operational NVMe device from a partition.
NVMe U.2 drives for the 9040-MR9 29