Setdigout; Countrecs; Towingreact; Btgetlist - Teltonika FMB920 User Manual

parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
Response details
FLUSH SMS Accepted
# records found on FLASH
Minimum Records to Send: #
GPRS Enabled: #
Time Sync: #
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1.
GPRS Enabled: 1. Time Sync: 1.

6.1.10 setdigout

Sets digital output to ON or OFF state (timeout for output is controllable)
Example: 'setdigout 1 60' will set OUT to high level for 60 seconds,
'setdigout 1' will set OUT to high level for infinite time.

6.1.11 countrecs

Returns the number of records save in the Micro SD card.

6.1.12 towingreact

Reactivates Towing Detection to initial state (does not wait for ignition to be OFF). Useful
when generated false Towing event and needs reactivation.

6.1.13 btgetlist

btgetlist command
btgetlist 0; device will respond with BT_LIST_Discovered
btgetlist 1; device will respond with all paired devices
btgetlist 2; device will respond with connected blutetooth device
Note: Without
In FW 01.00.23 btgetlist (without args) will not respond (as unknown command)
6.2

System parameters

6.2.1

Sleep Mode (ID=102)

Device has two sleep modes: sleep and deep sleep mode. While sleep is disabled (value 0)
module will never enter sleep mode, in sleep mode (value 1) module reduces level of power
usage by turning GPS module to sleep, in deep sleep mode (value 2) module turns GPS module to
FLUSH SMS Accepted
Number of records found on FLASH
Number of minimum saved records to send
State of the GPRS connection, 0 – disabled; 1 –
enabled
Indicates time synchronization on the device, 0
– not
synchronized; 1 – synchronized
needs argument
argument it is
Description
what list should
always 0 i.e
be printed!
BT_LIST_Discovered
59