Mounting Recommendations; Connecting Wires; Connecting Power Source - Teltonika FMB920 User Manual

8022 String
50230 Uint8
50231 Uint8
50232 Uint16
50233 Uint16
50234 Uint8
50235 Uint16
7023 Uint8
8023 String
50240 Uint8
50241 Uint8
50242 Uint16
50243 Uint16
50244 Uint8
50245 Uint16
7024 Uint8
8024 String
50250 Uint8
50251 Uint8
50252 Uint16
50253 Uint16
50254 Uint8
7069 Uint8
8069 String
50260 Uint8
50261 Uint8
50262 Uint16
50263 Uint16
50264 Uint8
7069 Uint8
8069 String

7 MOUNTING RECOMMENDATIONS

7.1

Connecting Wires

 Wires should be fastened to the other wires or non-moving parts. Try to avoid heat
emitting and moving objects near the wires.
 The connections should not be seen very clearly. If factory isolation was removed while
connecting wires, it should be applied again.
 If the wires are placed in the exterior or in places where they can be damaged or exposed
to heat, humidity, dirt, etc., additional isolation should be applied.
 Wires cannot be connected to the board computers or control units.
7.2

Connecting Power Source

 Be sure that after the car computer falls asleep, power is still available on chosen wire.
Depending on car, this may happen in 5 to 30 minutes period.
0 0
0 0
3 0
0 -8000
0 -8000
0 0
1 0
0 0
0 0
0 0
3 0
0 -8000
0 -8000
0 0
1 0
0 0
0 0
0 0
3 0
0 0
0 0
0 0
0 0
0 0
0 0
3 0
0 0
0 0
0 0
0 0
0 0
160 SMS Text
3 Axis Y Priority
6 Axis Y Operand
8000 Axis Y Hight level
8000 Axis Y Low level
1 Axis Y Event only
65535 Axis Y Average
10 Send SMS
160 SMS Text
3 Axis Z Priority
6 Axis Z Operand
8000 Axis Z Hight level
8000 Axis Z Low level
1 Axis Z Event only
65535 Axis Z Average
10 Send SMS
160 SMS Text
3 ICCID Priority
6 ICCID Operand
8000 ICCID Hight level
8000 ICCID Low level
1 ICCID Event only
10 Send SMS
160 SMS Text
3 SD Status Priority
6 SD Status Operand
8000 SD Status Hight level
8000 SD Status Low level
1 SD Status Event only
10 Send SMS
160 SMS Text
88