10. After all these steps press „Save to device" to save configuration (Figure 2.9).
11. Now you can disconnect FMB device from a PC or stay connected if you want to make
further changes to configuration.
5.16.2 Connecting to Bluetooth OBD II dongle
After this configuration you could connect your car OBD II dongle to FMB device. Turn on
ignition then turn on its Bluetooth connection. For pairing follow your dongle instructions
II device notification about paired Bluetooth connection depends on specific model. If you later
restart FMB device it will automatically connect to this dongle.
5.16.3 Supported Bluetooth OBD II dongles
FMB module works with Bluetooth OBD II dongles which are made with ELM327 or
STN1110 chips.
6
OBD II dongle Bluetooth connection pairing instructions depends on specific model.
Figure 3. OBD II Bluetooth settings.
6
. OBD
51