Configuration; Configurator - Teltonika FMB920 User Manual

FMBXX supports one connection at a time.

5 CONFIGURATION

5.1

Configurator

New FMB900 module has default factory settings. Settings should be changed according to
your application and your GSM operator information.
FMB900 configuration may be performed via SMS commands or configurator.
FMB900 has one user editable profile.
It can be configured to acquire and send data to server. If device is not able to send data to
server, GSM is not available FMB900 will start storing records to flash memory. It is possible to
store up to 122880 data records with 64mb SD memory card. It will send data later when GPRS is
available again. Note that FMB900 can have memory full of records. In such case it will start
deleting oldest records in order to save new ones. Sending all data records to server may take
some time.
FMB900 configuration is performed via FMB900 Configurator program. Contact sales
manager to get the latest FMB900 Configurator version. FMB900 configurator operates on
Microsoft Windows OS and uses MS .NET Framework. For Windows XP you will need MS .NET
Framework 4 (with MS .NET Framework 4 update KB2468871-v2) for Windows Vista, Windows 7,
Windows 8.1, Windows 10 MS .NET Framework 4.6.2 or later. Please ensure that suitable MS
.NET Framework version for your OS is installed on your PC before starting configurator. Latest
MS .Net Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable. Configuration process starts from
starting FMB900 Configurator program and then connecting to FMB900 device via Connect
button located in Online menu part. FMB900 has one user editable profile, which can be loaded
from device, and saved. User can also revert to default settings, by pressing Reset to defaults
button. After any modification of configuration settings it has to be saved to FMB900 device,
otherwise it will not be written to device.
24