Connecting Bluetooth Hands Free Adapter - Teltonika FMB920 User Manual

4. When device configuration is loaded press „Bluetooth" settings (Figure 2.2).
5. Turn on BT Radio by pressing „Enable (visible)" (Figure 2.3). You could leave "Local
name" (Figure 2.4) box empty (then device name will automatically be "FMBxx_last 7
imei digits") or type your own name.
6. Set Security Mode (Figure 2.5) to "PIN only" or "None" (you could select "PIN + MAC
list" or "MAC list only" security mode but in this case you need to type external
device MAC address in "Authorized Devices MAC List" (Figure 2.8).
7. Set connection mode to "Hands Free" (Figure 2.6).
8. Set „External Name" as your Hands Free device name for proper device identification
and connection to it. In this example Hands Free headset name is „MBH10" but at
least 2 characters are needed to recognize it and connect to it. For better and faster
adapter identification in network you could enter a full device name. You could check
your Hands Free adapter Bluetooth name by scanning nearby Bluetooth devices using
mobile phone or computer with Bluetooth adapter.
9. Go to "SMS \ Call Settings" in left menu and set "Incomming Call Action" to "Do
Nothing" visible at Figure 3.
10. After all these steps press „Save to device" to save configuration (Figure 2.9).
11. Now you can disconnect FMB device from a PC or stay connected if you want to make
further changes to configuration.

5.13.2 Connecting Bluetooth Hands Free adapter

After this configuration you could connect your Hands Free device to FMB device. Turn on
Hands Free device then turn on its Bluetooth connection for pairing following your model
4
instructions . Hands Free adapter should make a special sound in ear from speaker or its led
identification should change to inform about successful connection
successfully connected, call to FMB device, Hands Free device should start ringing. If you later
restart FMB device it will automatically connect to this adapter.
4
Hands Free device Bluetooth connection pairing instructions depends on specific model.
5
Hands Free device notification about paired Bluetooth connection depends on specific model.
Figure 3. Incomming Call Action settings.
5
. To check if adapter is
46