Terminal Log For Fmb Devices - Teltonika FMB920 User Manual

Relays
An ordinary automotive relay is used to invert input signal or to immobilize engine starter.
Note, that they are available as 12 V or 24 V.
3.5

Terminal log for FMB devices

FMB device is able to transmit its current state when it
is connected to PC using USB cable. It is used to detect errors
and provide information for solution when device is operating
as unexpected. Required Terminal application can be
downloaded here:
http://avl1.teltonika.lt/Downloads/Software/Terminal.zip
After connecting FMB device to PC, it creates two ports:
 MTK USB Debug Port – used for modem trace;
 MTK USB Modem Port – used for Terminal log.
If connected FMB device is not recognized by PC, please
install apropriate drivers. Here is download link:
http://avl1.teltonika.lt/Downloads/FMB9XY/
After selecting your port (usually lower number port)
click connect and then click on 'Start Log' button. If log is not
running, please send .log:1 command (see picture below).
Figure 8 Automotive relay pinout
18