Setdigout ## Y1 Y2; Getparam; Setparam; Getparam 1271 X/212 X - Teltonika FM3622 User Manual

6.1.11 setdigout ## Y1 Y2

for OUT1 and OUT2 values.
level.
To ignore one digital output value and make ON/OFF state only to another digital output in place
of 0 or 1 values, "?" must be used.
OUT1 remains as it was set before.

6.1.12 getparam ####

be found in chapter number 8 "Parameter List"

6.1.13 setparam ####

IDs can be found in chapter number 8 "Parameter List"

6.1.13. getparam 1271 X/212 X

If X = 1, Operator codes from 0-19 are read from configuration and sent via SMS.
If X = 2, Operator codes from 20-39 are read from configuration and sent via SMS.
If X = 3, Operator codes from 40-49 are read from configuration and sent via SMS.
If X = any other, Operator codes from 0-19 are read from configuration and sent via SMS.

6.1.14. setparam 1271 X/212 X

operator codes may be configured in 1 SMS. Example: Setparam 1271 16 24602,24603,24605
,here 16
in the configuration.

6.1.15 readops #

other operator codes.

6.1.16 flush #,#,#,#,#,#,#

go as numbered:
Downloaded from www.Manualslib.com
Sets digital outputs to ON or OFF state (for some time if needed). Value is written as a row
Example: 'setdigout 01 0 5' will set OUT2 to high level for 5 seconds, while OUT1 to low
Example: 'setdigout ?1' will set OUT2 to high level for indefinite period of time while
Read parameter value. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can
Example: 'getparam 1245' command will request server IP address.
Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and
Example: 'setparam 1245 127.0.0.1' will change configured IP address.
X values can be 1,2,3.
If X is from 0 to 49, X means index of operator code which has to be configured. Up to 20
th th th
, 17 and 18 operator codes are set. Note! Other operator codes are left unchanged
Send from device Operator List.
1 – send first 20 operator codes, 2 – send from 21
Initiates all data sending by GPRS to specified target server. Comma separated parameters
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
manuals search engine
st th
to 40 operator codes, 3 – send all
61