Table of Contents
Advertisement
7.10 getinfo
Response details
Example: INI:2007/8/24 10:15 RTC:2007/8/24 12:43 RST:2 ERR:11 SR:182 BR:0 CF:0
FG:0 FL:0 UT:0 P:1 P0:0 P1:1 P2:0 P3:0 P4:0 SMS:2 NOGPS:0:0 GPS:3 SAT:7 RS:7
7.11 readio #
Example: IO ID:3 Value:0
7.12 setdigout ####
Sets digital outputs to ON or OFF state. Value is written as a row for OUT1, OUT2, OUT3,
OUT4 values.
Example: 'setdigout 0100' will set OUT2 to high level, while OUT1, OUT3 and OUT4 to low level.
7.13 getparam ####
Read parameter value. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in Parameter List chapter.
Example: 'getparam 1245' command will request server IP address in profile1.
Downloaded from
www.Manualslib.com
INI
Device Initialization Time
RTC
RTC Time
RST
Restart Counter
ERR
Error Counter
SR
Number of Sent Records
BR
Number of broken records
CF
Profile CRC Fail counter
FG
Failed GPRS counter
FL
Failed link counter
UT
UPD Timeout counter
P#
Current profile, P#: 0 – inactive profile, 1 – active profile
SMS
Sent SMS Counter
NOGPS
No GPS Timer
GPS
GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 –
ON and operational, 4 – sleep mode
SAT
Average satellites
RS
Reset Source Identification
Response details
ID
Value
Response details
ID
Value
manuals search engine
Description
Description
IO element ID
IO Element value
Description
Profile number and parameter ID
Parameter value
48
Advertisement
Table of Contents
