Deleterecords; Readio; Setdigout #### X Y Z W; Getparam - Teltonika FM6300 User Manual

Answer Example: INI:2007/8/24 10:15 RTC:2007/8/24 12:43 RST:2 ERR:11 SR:182 BR:0 CF:0
FG:0 FL:0 UT: P:1;0;1;0;0;0 SMS:2 NOGPS:0:0 GPS:3 SAT:7 RS:7 RF:11
14.14

deleterecords

Deletes all saved records from device memory. Device does not send a response back to
the sender.
14.15

readio #

Response details Description
ID IO element ID
Value IO Element value
Answer Example: IO ID:3 Value:0
14.16

setdigout #### X Y Z W

Sets digital outputs to ON or OFF state.Value is written as a row for OUT1, OUT2, OUT3,
OUT4 values.
Example: 'setdigout 0010 0 0 5 0' will set OUT3 to high level for 5 seconds, while OUT1,
OUT3 and OUT4 to low level.
Device Ans example: "DOUTS are set to:0010 TMOs are: 0 0 5 0. Out1 Scenario: Enabled
Out2 Scenario: Disabled"
14.17

getparam ####

Read parameter value. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in Parameters Configuration chapter 6.3.
Response details Description
ID Profile number and parameter ID
Value Parameter value
Example: 'getparam 240' command will request SIM1 APN.
14.18

setparam #### #

Sets new value for parameter. ID consists of 4 digits – first digit identifies profile, second,
third and fourth identifies parameter ID as described in Parameters Configuration chapter 6.3. In
value field a new parameter value is entered.
Example: 'setparam 240 internet' will change SIM1 APN with new value"internet"
For ignoring value and leave it as it was before "?" should be used.
14.19

flush #,#,#,#,#,#,#

Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
Table 47 readio command response
Table 48 getparam####
101