Getinfo - Teltonika FMB920 User Manual

getinfo

getver
getstatus
getgps
ggps
readio
cpureset
getparam
setparam
flush
countrecs
setdigout X,Y
fc_reset
towingreact
btgetlist
btgscan
btvisible
btrelease
btunpair
Setparam and setdigout SMS is used to configure device.
Parameter ID consists of 3 or 5 digits. Detailed list of parameters and IDs can be found in
chapter number 5.2 "System parameters"
Example: 'username password setparam 102:0' will disable sleep mode.
Example: 'username password setparam
configured APN name, APN username and APN password. SMS command of limited to 160
characters.
Example: 'username password setdigout 1 60' will set digital output ON for 60s.
6.1.1 getinfo
Response details
RTC RTC Time
GPS GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 –ON and
operational, 4 – sleep mode
SAT Average satellites
Example: RTC:2017/1/9 14:13 GPS:1 SAT:0
Returns RTC time, GPS status, SAT
Returns code version, device IMEI, modem app
version, RTC time
Returns Data Link:0 GPRS:0 Phone:0 SIM:0 OP:24602
Signal:5 NewSMS:0 Roaming:0 SMSFull:0 LAC:0 Cell ID:
0
Returns GPS status, Satellite number, Latitude,
Longitude, Altitude, Speed, Date, Time
Returns location information with Google maps link
Returns IO status
Resets device
Returns selected parameter value
Sets selected parameter value
Redirects device to other server
Returns record number
Set digital output
X – 0 or 1
(0 - OFF or 1 – ON)
Y – timeout value if needed (in seconds)
Resets fuel consumption parameters
Towing reactivation
Returns requested Bluetooth list(values:0, 1, 2)
Starts Bluetooth scan(values: none, 1)
Sets Bluetooth to visible with TMO
Disconnects from current device and pauses auto connect
functionality for TMO
Unpair Bluetooth device
Description
2001:wap;2002:user;2003:pass' will change
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
56