Gps Fuel Counter - Teltonika FMB920 User Manual

parameters. It is possibility to state whether entering in or out of the geofence triggers an
asynchronous message.
AutoGeofencing option can be configured by following parameters visible in figure 28
below.
Activation TMO – Time period before Geofence is activated after vehicle stops.
Deactivate By:
Ignition – If ignition becomes high it will disable AutoGeofenze Zone;
Power Voltage – if power voltage enters entered value it will disable AutoGeofenze
Zone.
Digital input 1 – if digital input is triggered it will disable AutoGeofenze Zone.
Feature – Priority of generated event, which will be applied to saved record.
Enter Event – Event generation on Geofence entrance.
Exit Event – Event generation on Geofence exit.
On Both - Event generation on Geofence entrance Or exit
Eventual Records – Enable or Disable Eventual Records functionality.
Note that AutoGeofencing does not require entering coordinates, instead it requires GPS
visibility. If vehicle stopped and activation timeout has passed, an AutoGeofence will be created
around vehicle's last position with set Radius value.

5.10 GPS Fuel Counter

Figure 21 Geofence configuration
39