Table of Contents
Advertisement
Display item
Tx: –12.345
Tz: 12.345
Ty: 10.000
(L system)
Tg: 12
Tw: 12
(L system)
V (L system)
FA 24000.00
FM
1200.00
FS
0.0000
FE
0.0000 (L system)
S12345
T1234
M12345678 10 35 40
B1234
N300 G1X-100.234~
The total of the X axis, Z axis and additional axis' tool length and
wear compensation amounts for the tool being used is displayed.
The tool length offset No. is displayed.
The wear compensation No. is displayed.
The surface speed modal value for the program command constant
surface speed control currently being executed is displayed.
The program command asynchronous feedrate modal value
currently being executed is displayed. (mm/min)
The manual feedrate is displayed. (mm/min)
The program command synchronous feedrate modal value
currently being executed is displayed. (mm/rev)
The thread lead command synchronous feedrate modal value
currently being executed is displayed. (mm/rev)
The modal value of the current program command S being
executed is displayed.
The modal value of the current program command T being
executed is displayed.
A maximum of four modal values of the current program command
M being executed are displayed.
The second miscellaneous function modal value of the current
program command being executed is displayed.
The current program block being executed is displayed.
I-43
2. Monitor
2.3 COMMAND
Explanation
Advertisement
Table of Contents
